//

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
serial-recovery [2017/02/16 19:10]
anonabox
serial-recovery [2017/02/16 19:26] (current)
anonabox
Line 7: Line 7:
 For serial connection to work, set the baud rate to 115200, data bits 8, parity: None Stop bits:1 For serial connection to work, set the baud rate to 115200, data bits 8, parity: None Stop bits:1
  
-Hit any key during bootup to stop the regular boot process and get into recovery mode. YOu will know you are in recovery mode when you see the prompt represented as:+Hit any key during bootup to stop the regular boot process and get into recovery mode. You will know you are in recovery mode when you see the prompt represented as:
 **ath>** **ath>**
 Instead of the usual: Instead of the usual:
 **root@anonabox:/#​** **root@anonabox:/#​**
  
 +Paste the following commands into the serial terminal in order. After the last command is entered the device will boot itself up. 
  
 tftpboot 0x81000000 openwrt-ar71xx-generic-ap143-16M-kernel.bin tftpboot 0x81000000 openwrt-ar71xx-generic-ap143-16M-kernel.bin